SPX CUES flexiprobe, Руководство по эксплуатации

Страница: 110 / 302

flexitrax™ flexiprobe™ Operation Manual
5 System setup
www.cuesinc.com | 110
Briefly, after the setup wizard is complete, in the Equipment settings menu, select the drum type,
crawler, crawler wheel size, camera type and other equipment that is currently attached to the controller.
Then select the
Continue menu item.
You will then continue to the controller home screen.
If you have a pushrod connected you will be advised to rewind the pushrod fully onto the reel (coiler).
Make sure the pushrod is layered evenly and correctly onto the reel and the end of the rod is level with
the rod guide.
Press the Calibrate button to calibrate the reel.
After calibrating the reel, press the Back button or Esc key to return to the controller home screen.
You can now use the Settings menus to configure the system; continue to section 5.5.
Note: For definitions of calibration and zero distance, see section 1.2 .
Status icons
The home screen displays status icons in the top left hand corner, referring to the drum and either the
crawler or pushrod that is connected. The different icons displayed, and what they represent, are: