SPX CUES flexiprobe, Руководство по эксплуатации

Страница: 28 / 302

flexitrax™ flexiprobe™ Operation Manual
2 Quick Start
www.cuesinc.com | 28
5. Important! The controller displays the Equipment settings menu. If the Equipment settings menu is
showing the reel type currently attached to the controller, then press Select . Otherwise, change the
reel type, highlight Continue, then press Select .
6. The controller now displays an advisory reminding you to rewind the pushrod fully onto the reel (coiler).
Make sure the pushrod is layered evenly and correctly onto the reel .
When the rod is fully coiled on the reel, press the Calibrate button.
For full details about these steps, see section 6.8.
7. Deploy the camera into the pipe as required.
8. Zero the camera distance, as required, using the 0.00 button.
For details, see section 6.11.
9. Create a survey and start recording your survey video.
For details, see section 6.13.
550c flexitrax™
1. Make sure the PSU, whether separate or part of the powered drum, and controller are both powered
off.
2. Set up the controller:
(Optional) Mount the controller onto the drum using the supplied clamp.