SPX FLOW S280 M-14, Руководство пользователя, Страница: 73 / 93

Paraflow Plate Heat Exchanger
Instruction Manual
Issue 5 Section 3.0
June 13, 2008 Page 17 of 36
1
3
4
2
IMPORTANT NOTICE:
The standard conventions for identifying plates and
showing the plate arrangement diagram have
changed effective August 11, 1997.
The plate punch code will use
The five character code as shown
In Figure 11 or 12. The equivalent
three character code is shown for
reference. The position are numbered
as shown in the sketch on the right.
The complete plate identification
number is constructed as follows:
The plate arrangement and all general arrangement
drawing will now show the head or fixed cover on
the left. Frame connections are labeled with an H
(head) of F (follower) and a number corresponding
to the position.
Connection grids are labeled with a G plus a number
with 1 being the first grid from the head. Grid
connections are labeled as follows:
These labels are shown in the picture below and
examples of the plate arrangements are shown on
the following page.
Note:
All possible connection are
shown here.
Only the
connection
provided will be shown
on the customer
drawing
From gasket side
Kemper County MM218132 Approved