SPX FLOW S280 M-14, Руководство пользователя, Страница: 61 / 93

Paraflow Plate Heat Exchanger
Instruction Manual
Issue 5 Section 2.0
June 13, 2008 Page 5 of 36
2.0 SAFETY INSTRUCTIONS
2.1 General
Statement
APV Paraflow Plate Heat Exchangers are designed
and manufactured with due consideration and care for
generally accepted safety standards. However, like
any mechanical device, the proper and safe
performance of this equipment depends upon using
sound and prudent operating, maintenance and
servicing procedures under properly trained
supervision.
For your protection, and the protection of others, learn
and always follow the safety rules outlined in this
section. Observe warning signs on machines and act
accordingly. Form safe working habits by reading the
rules and abiding by them. Keep this booklet handy
and review it from time to time to refresh your
understanding of the rules.
2.2 Hazard Level Identification
Definitions for identifying the various hazard levels
shown on warning labels or to indicate proper safety
procedures in the instruction manual are provided in
the following labels.
2.3 Operating
Zone
An operating zone should be established around all
heat exchangers. A brightly painted guard rail or
warning stripe should define the zone. Only the
operator or other authorized personnel should be
within the operating zone when machine control
circuits are energized or the heat exchanger is
operating. No tools or other equipment should be kept
within the operating zone.
2.4 Installation
Utilities, such as water, steam, electric, air and
hydraulic, should be installed by trained and
authorized personnel only. Installations must comply
with all applicable codes and standards, including
those established by OSHA.
2.5 Safety Instructions
Before Starting a Machine
Be absolutely positive all necessary guards and safety
devices are installed and operating properly. This
includes spray screen or pressure relief devices.
Be sure all personnel are clear of the machine.
Remove (from the operating zone) any materials, tools
or other foreign objects that could cause injury to
personnel or damage the machine.
Danger:
The use of the word “Danger” always
signifies an immediate hazard with a high
likelihood of severe personal injury or
death if instructions, including
recommended precautions, are not
followed.
Warning:
The use of the word “Warning” signifies
the presence of hazards or unsafe
practices that could result in severe
personal injury or death if instructions,
including recommended precautions, are
not followed.
Caution:
The use of the word “Caution” always
signifies possible hazards that could result
in minor injury or damage to product or
property if instructions, including
recommended precautions, are not
followed.
Kemper County MM218132 Approved