SPX FLOW S280 M-14, Руководство пользователя, Страница: 67 / 93

Paraflow Plate Heat Exchanger
Instruction Manual
Issue 5 Section 3.0
June 13, 2008 Page 11 of 36
3.2 Plates
APV heat exchanger plates come in over 60
different sizes and 34 different corrugation patterns.
This allows the heat exchanger to be matched
closely to a specific duty. The corrugations cause
turbulence in the liquids as they flow in a thin stream
in the passage between each plate
(Figure 4) . The
plates have ports in each corner that, when stacked
in a plate pack, form a manifold for even fluid
distribution to the individual plate passages
(Figure
5) . The ports are gasketed so only two ports on each
plate allow flow across the plate (flow ports). The
other two ports are through ports and do not allow
the liquid flowing in them across the plate. This flow
pattern is alternated from plate to plate to form right
hand plates and left hand plates.
Figure 5
Figure 4
Stream A
Stream B
Stream A
Stream B
Flow Port
Through Port
Gasket
Kemper County MM218132 Approved