SPX FLOW S280 M-14, Руководство пользователя, Страница: 59 / 93

Paraflow Plate Heat Exchanger
Instruction Manual
Issue 5 Section 1.0
June 13, 2008 Page 3 of 36
1.0 INTRODUCTION
1.1 General
The purpose of this manual is to provide you with the
information necessary for the safe and proper
installation, operation and maintenance of your APV
Paraflow Plate Heat Exchanger. This will ensure
many years of satisfactory performance. The manual
is specific to the tie bar tightened frames. Separate
publications deal with Paraflow Plate Heat Exchangers
tightened by other means.
1.2 Safety
Safe installation, operation and maintenance of the
APV Paraflow Plate Heat Exchanger requires proper
procedures and training of all personnel. Section 2.0
Safety Instructions should be read and understood
before proceeding. This section discusses general
safety practices. In addition, specific hazards are
indicated throughout this manual by the appropriate
hazard label in bold type.
It is the objective of APV to clearly identify each area
of potential hazard and guide workers in safe
operation, service and maintenance procedures.
1.3 Design
The Paraflow is the original plate type heat exchanger
designed by APV to provide maximum efficiency and
cost effectiveness in handling heat transfer duties.
The basic concept is two liquids flowing on either side
of a thin corrugated metal plate so heat may be easily
transferred between the two. The plate heat
exchanger also minimizes maintenance downtime and
requires little floor space compared to other types of
heat transfer equipment. This equipment has many
applications in a wide range of industries. Typical
industries include:
Chemical
Dairy
Industrial Beverage
Petroleum Liquid Food
HVAC Pharmaceutical
Refrigeration Health Care
1.4
Receiving and Inspection
APV Paraflow Plate Heat Exchangers are assembled
and inspected before shipment and properly prepared
for transportation. APV cannot, however, guarantee
safe arrival. Therefore, upon receipt of this equipment,
check all received items against the packing list for
damage or missing parts. Damage or loss should be
reported immediately to the carrier.
Warning:
Read and understand the entire manual
before unpacking the equipment and
installing
it.
Kemper County MM218132 Approved