background image

 

  

 

P

ARTS

 M

ANUAL

 

4300 BULK BED

 

Part #: 290318

 

Revision: 4/18/2018

 

vi 

Limited Warranty Policy for New Spudnik Machinery

 

On the terms and conditions set forth herein, Spudnik Equipment Company LLC (“Spudnik”) warrants to the original 
purchaser of each new Spudnik machine that the machine is free from defects in material and workmanship. Spudnik 
will repair or replace, at its option, any part covered by this warranty that is found to be defective during the warranty 
period outlined below. Warranty service must be performed by an authorized dealer or representative of Spudnik. This 
warranty is applicable only for the normal service life expectancy of the product or components, as noted in the following 
table. Once the warranty period has begun, it cannot be suspended, interrupted, or extended.

 

What is included in the Spudnik Warranty:

 

Those items that are excluded from this warranty are as follows

:

 

(1) 

Any merchandise or components thereof, which, in the opinion of the company have been subject to: 

(a) 

Rock chip 

damage and other abuse to painted surfaces, 

(b) 

Damage caused by weather (including UV damage), accident, or acts 

of God, 

(c) 

Any product that has been altered or modified in ways not approved by Spudnik, 

(d) 

Depreciation or 

damage caused by normal wear, lack of reasonable and proper maintenance, misuse, failure to follow the product’s 
Operator Manual recommendations, 

(e) 

Using machine for other than normal moving of agricultural products during 

planting, harvest, and processing seasons. Agricultural products to include: Potatoes, beets, onions, carrots, grains, 
etc. 

(2) 

Used products. 

(3) 

Repairs made by unauthorized dealers.

 

To Obtain Warranty Service

 

To be eligible for the Spudnik warranty, purchaser must: (a) Have already remitted payment in full (b) When 
purchased by an authorized dealer, have entered the delivery declaration into the Spudnik warranty website 
tools.spudnik.com, (c) Report the product defect to an authorized dealer or Spudnik sales representative and request 
repair within 30 days of noticing the defect, (d) Repair or replace failed parts immediately upon failure to prevent 
additional damage  (e) Make the product and/or failed parts available to the dealer or service center within 90 days 
following submittal of claim, transportation/shipping charges prepaid.

 

The selling dealer has no authority to make any representation or promise on behalf of Spudnik, or to modify the terms 
or limitations of this warranty in any way.

 

Limited Warranty Statement

 

Except as expressly stated herein, to the full extent permitted by law, Spudnik disclaims any and all warranties, 
representations, and promises, express or implied, as to the quality, performance, or freedom from defect of any 
Spudnik new machinery. NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS IS MADE. IN NO EVENT 
WILL SPUDNIK, AN AUTHORIZED SPUDNIK DEALER, OR ANY COMPANY AFFILIATED WITH SPUDNIK BE LIABLE 
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty is subject to any existing conditions of supply 
which may directly affect Spudnik’s ability to obtain materials or manufacture replacement parts. Spudnik reserves the 
right to make improvements in design or changes in specifications at any time, without incurring any obligation to owners 
of units previously sold. No one is authorized to alter, modify or enlarge this warranty nor the exclusion, limitations, and 
reservations set forth herein. This limited warranty policy supersedes and replaces all other policies pertaining to 
warranty.

 

To obtain more information please contact your dealer, or Spudnik at 1

-

208

-

785

-

0480.

 

Product

 

Warranty Term

 

Rollers, Sprockets, Roller Chain, Belt Lacing, and Bearings.

 

180 Days from 1

st

 day of operation or 250 Hours of 

machine operation, whichever comes first.

 

All paint to include: Insufficient coverage, failure of paint adher-
ence, and excessive runs. NOTE: Runs are excessive if they 
exceed more than 15% of the painted surface on the machine.

 

12 Months from date of delivery of new Spudnik 
product to the original retail customer.

 

All other materials and workmanship (except as noted below).

 

12 Months from date of delivery of new Spudnik 
product to the original retail customer.

 

Genuine Spudnik replacement parts and components.

 

30 days from date of purchase, or the remainder of 
the original equipment warranty period, whichever is 
longer.

 

Содержание 290318














































































Отзывы: