8
OPERATING INSTRUCTIONS
Fig.4
Other features
After the unit has stopped (or powered off), there
will be a 3-minute delay before unit will start up
again. This is to protect the compressor. Operation
will automatically resume after 3 minutes.
Wait 3 minutes before resuming operation
SLEEP operation
If the unit breaks off unexpectedly due to
power cut, it will restart at previous function
when the power resumes.
Auto-Restart
The louver can be adjusted automatically (Fig. 4):
-
When unit powers ON, the louver opens fully.
- Press the SWING button on the panel or
remote controller to initiate the Auto swing
feature. The louver will automatically swing
up and down.
- Press SWING button again at desired angle
for set air flow.
- Please do not adjust the louver manually.
Air flow direction adjustment
Swing automatically
- If unit is running in COOL mode when SLEEP
function is activated, unit will automatically
increase set temperature by 1°C/2°F after 30
minutes. After another 30 minutes, unit will
again increase temperature by 1°C/2°F.
- If unit is running in HEAT mode (heating
models only) when SLEEP function is
activated, unit will automatically decrease set
temperature by 1°C/2°F after 30 minutes. After
another 30 minutes, unit will again decrease
temperature by 1°C/2°F.
- Unit will maintain the new temperature for 7
hours, then returns to original set temperature.
This ends the Sleep function and unit will
continue to operate as originally programmed.
Note:
This feature is unavailable under FAN or
DRY mode
