SPT WA-1240AE, Руководство пользователя

Страница: 18 / 24

Function buttons
1
TEMP DOWN Button
Push this button to decrease set temperature, in
increments of 2°F (1°C). Lowest is 62°F (17°C°)
2
TEMP UP Button
Push this button to increase set temperature, in
increments of 2°F (1°C). Highest 88°F (30°C°)
Each time the button is pressed, the operation
mode is selected in the following sequence:
3 MODE Button
TEMP
AUTO
COOL
DRY
HEAT FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
1
2
4
3
6
5
7
8
9
10
11
SET TEMPERATURE( C)
LED
DISPLAY
4
SWING Button
Press to start/stop auto swing feature. Or to set
desired angle for directional airflow.
5
6
RESET Button
If the recessed RESET button is pressed, all
current settings will be cancelled and the
controller will return to the default settings.
7
ON/OFF Button
Power button, press to turn unit ON/OFF.
NOTE: Heat mode is for Cooling & Heating models only.
AUTO COOL DRY HEAT FAN
Press to select the fan speed in four steps:
Auto Low Med High
FAN SPEED Button
12
TIMER ON Button
8
Press to activate Auto-on timer. Each press
increases the timer setting by 30-minutes, up
to 10 hours. Then at 1-hour increments, up
to 24 hours. To cancel the Auto-on timer, press
the button until time setting is 0.0.
9 ECONOMY(SLEEP) Button
Press to engage Sleep mode. Select this
function for the sleeping hours to maintain the
most comfortable temperature and save energy.
This function is only available under AUTO,
COOL and HEAT (heating models) modes.
NOTE: SLEEP function would be cancelled if
ON/OFF, FAN SPEED, SLEEP or MODE button
is pressed.
HANDLING THE REMOTE CONTROLLER
17
TIMRT OFF Button
LOCK Button
10
11
Press this recessed button to lock all current
settings (a lock symbol will appear on the LCD).
When the remote is locked, it will not respond
to any actions except LOCK. Use the LOCK
mode when you want to prevent any accidental
setting changes. Press again to unlock
Press this button to turn off the display on the
unit, press it again to light the display .
LED Display Button
12
Press to activate Auto-off timer. Each press
increases the timer setting by 30-minutes, up
to 10 hours. Then at 1-hour increments, up
to 24 hours. To cancel the Auto-off timer, press
the button until time setting is 0.0.