INSTALLATION INSTRUCTIONS
11
Installation for sliding sash window
1. Trim foam seal (with adhesive) to the proper length
and attach to window frame (Fig.12).
2. Adjust the length of the slider kit according to the height
of the window. Place window slider kit against foam
seal (Fig.13).
3. Trim another foam seal (with adhesive) to the proper length
and attach it to the open side of slider kit (Fig.14).
4. Slide window close against the slider kit.
5. Trim the last foam seal to the proper length to seal the
open gap between the two window sashes (Fig.15).
Foam seal
Foam seal A
(adhesive type)
Fig.12
Fig.13
Fig.14
Fig.15
Window
panel
C
NOTE:
All illustrations in this manual are for explanation
purposes only. Your unit may differ slightly. The
actual shape shall prevail.
