background image

                                                                                                       

    

             

                                                                                                                                                                                        

Features: 

 

Stainless Steel front panel and flat door 

 

LED indicators on operation board 

 

Internal water storage tank for water preservation 

 

Insulated ice storage cabinet 

 

Gravity based draining 

 

Auto-cleaning function: Every time the unit is turned on, it will go through an auto-cleaning 

process. During this process, the 3 indicator lights (“RUN”, “FAULT” and “WATER LOW”) will 

flash at the same time. This process takes about one minute 

 

Overheat protection: If the internal temperature is above 164°F, the unit will shut-off 

automatically with “FAULT” and “WATER LOW” lights flashing and the “RUN” light staying solid. 

The unit will resume operation when the internal temperature drops below 158°F. 

 

Before First Use: 

1.

 

The unit should not be tilted more than 45° during transportation and unpacking. Do not turn 

the ice maker upside-down as this may damage the compressor or refrigeration system.   

2.

 

The flake ice maker should be placed on a flat, level and firm surface away from any heat 

sources or corrosive gas.  

3.

 

This unit is for Free-Standing use only. It vents from the sides. Do no place anything above the 

unit or install under-counter. There must be at least 3 feet of clearance on each side and at least 

6-inches behind the unit.  

4.

 

Wait 12 hours after installation before turning on the ice maker. 

5.

 

Unit is designed for use in a 3-prong grounded outlet. Do not use adapters to bypass this 

feature. 

6.

 

If the power cord is damage, it must be replaced by a qualified person to avoid electrical 

hazards. 

7.

 

Flake ice maker should be connected to a drinkable water supply only. 

8.

 

This appliance is not intended for use by children or other persons without assistance or 

supervision if their physical, sensory or mental capabilities prevent them from using it safely. 

Children should be supervised to ensure that they do not play with the appliance. 

1

.

.

9.

 

Please do not place the machine near flammable materials. 

10.

 

Use only new hose sets with the appliance. Do not use previously used hoses. 

Содержание SZB-20









Отзывы: