background image

                                                                                                               

         

                                                                                                                                                                                        

           

   Installation Instructions:

 

1.

 

Unpack the ice maker and take out the attached documents and included parts, such as the 

water inlet and drain tubes, ice shovel and gaskets. 

2.

 

Install in the proper free-standing location. (See Before First Use) 

3.

 

Connect one end of the drain tube to the water outlet connector on the ice maker. Connect the 

other side to your drain or external condensation pump. (purchased separately from most 

hardware or plumbing stores) 

4.

 

Connect one end of the water inlet tube to the ice maker with the ¾” screw type connector. 

Connect the other end to your water supply. The water pressure of the water supply pipe is 1.5 

to 3 bar. (22 to 44 PSI) 

5.

 

Insert the plug into the power supply socket. 

 

Maintenance: 

1: If the compressor stops for any reason like water shortage, ice full, power off or loss of power; do not 

restart it right away. Please wait about 5-minutes. 

2: Check the water inlet and drain line connectors regularly for any signs of cracks or wear.  

3: If the ice maker will be unused for a long period of time, please switch off the power switch and wipe 

the inner liner of the ice storage container. Also, drain the internal water tank via Drain Spout. (Part No. 

9) 

4: Unplug the unit by holding the plug, not the cord wire. 

Specifications: 

Model 

Ice Making 

Capacity* 

(lbs/24hrs) 

Rated 

Voltage 

Power 

Consumption 

(W) 

Ice Storage 

Capacity (lbs) 

Dimensions (in) 

SZB-20 

66 

110-120V / 

60Hz 

270 

7  

13 X 19.8 X 23.8 

SZB-40 

88 

380 

12 

15.7 X 21.4 X27.6

 

        

    

             

3

.

.

* Based on water temperature at 50°F and ambient temperature at 59°F. 

Содержание SZB-20









Отзывы: