46
determined by “n” set by command “GSW”
[REFERENCE]
ESC Z, GS w
The Chinese characters controlling commands
FS ! n
[Name]
Setting Chinese characters mode
[Format]
ASCII
FS
!
n
Hex
1C
21
n
Decimal
28
33
n
[Range]
0 ≤n ≤ 255
[Description]
Using value of n to set the printing mode of Chinese characters
Bit
0/1
Hex
Decimal
Function
0, 1
Undefined
2
0
00
0
Canceling double width
1
04
4
Selecting double width
3
0
00
0
Canceling double height
1
08
8
Selecting double height
4-6
Undefined
7
0
00
0
Canceling underline
1
80
128
Selecting underline
[Note]
·When double width and double height are set together, portrait and landscape will
been amplified two times together(including left and right space).
·Printer can add underline to all the characters, including left and right space. But
can not add underline to the space caused by HT command (horizontal
tab),either the 90 degree clockwise characters.
·The width of underline is set by FS- , has no relation to the character boundary
·When the height of the character in one line is not the same, all the characters
align the base line
·Using FS W and GS !can make the characters bold, the setting of the last received
command is effective.
·Also can use FS to select or cancel the underline, the setting of the last received
command is effective.
[Default value]
n = 0
[Reference]
FS -, FS W, GS !
FS &
[Name] Selecting Chinese character mode
[Format]
ASCII
FS
&
Hex
1C
26
Decimal
28
38
