12
6.Control commands
Format description
we will tell you how to read this chapter in first part and please read before your programming.
Instructions of this chapter includes the following
1
）
Overview of the command name and function: it is the first part of command description. It
tell the command in form of ASCII code and its function description. Format: this part tells
command in ASCII encoding, Hexadecimal and Decimal form. The range is the decimal
number if there is no special instructions, such as 1 ≤ n ≤ 4,the”1” is decimal number but
not ASCII code.
2
）
Range: it tell the range of variable.
3
）
Description: it tell the detailed explanation of command.
4
）
Note: it gives some notes of commands.with different modes of commands or working with
other commands, these commands will be affected with each other,so this section tell
details.
5
）
Reference: other commands related or similar with these commands.
For example:
---> DLE EOT n
Real time transmission status
---> [Format]
ASCII
DLE
EOT
n
Hex
10
04
n
Decimal
16
4
n
---> [Range]
1 ≤ n ≤ 4
---> [Description]
Sending the printer state that designated by parameter n just in time
…..
---> [Note] ·When printer receives the command, returns to the interrelated status
immediately….
---> [Reference]
HT
[Name]
Horizontal tab
Lift the cutter
Paper lever
