30
the direction of printing area and zero position.
The system of selection is as below:
1
Using horizontal shifting when the beginning position is the top left
or lower right corner of the printing area which is set by ESC T;
②
Using vertical shifting when the beginning position is the lower left
or top right corner of the printing area which is set by ESC T
[Reference] ESC $, GS P
ESC a n
[Name]
Selecting alignment mode
[Format]
ASCII
ESC
a
n
Hex
1B
61
n
Decimal
27
97
n
[Range]
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Making all the printing data array in appointed alignment
Relationship between value of n and alignment are as below:
n
Alignment
0,48
Align left
1, 49
Align center
2, 50
Align right
[Note]
·This command is just available at the zero position of the line and under
Standard mode.
·This command just changes the internal mark position under page mode.
· This command revises the blank area according to HT,ESC$ or ESC\.
[Default value]
n = 0
[Example]
ESC c 5 n
[Name]
Permitting/Forbidding key stoke
[Format]
ASCII
ESC
c
5
n
Hex
1B
63
35
n
Decimal
27
99
53
n
[Range]
0 ≤ n ≤ 255
