18
ESC $ nL nH
[Name]
Setting absolute print position
[Format]
ASCII
ESC
$
nL nH
Hex
1B
24
nL nH
Decimal
27
36
nL nH
[Range]
0≤nL ≤ 255
0 ≤nH≤255
[Description]
Setting the distance from the beginning of the line to the position at which
(nL+nH×256) ×(vertical or horizontal motion unit)
[Reference]
This command is ignored if the setting position is out of the printing area.
Vertical and horizontal motion units are set by GSP.
Using horizontal motion units under standard mode.
Under page mode, selecting to use vertical or horizontal motion units according
to the direction of printing area and zero position.The system of selection is as
below:
①
Using horizontal shifting when the beginning position is the top left or lower
right corner of the printing area which is set by ESC T;
②
Using vertical shifting when the beginning position is the lower left or top right
corner of the printing area which is set by ESC T;
[Reference]
ESC \, GS $, GS \, GS P
ESC % n
[Name] Selecting/Canceling self defined character
[Format]
ASCII
ESC
%
n
Hex
1B
25
n
Decimal
27
37
n
[Range]
0 ≤ n ≤255
[Description] Selecting/Canceling self-defined character
When n(LSB)=0, cancel user-defined character set.
When n(LSB)=1, select user-defined character set.
[Note]
When cancel user-defined character set, auto select built-in character set.
n only LSB is available.
[Default]
n = 0
[Reference]
ESC &, ESC ?
ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
[Name]
Define user defined character
