Sprint QCP-196, Руководство пользователя

Страница: 22 / 79

19
Standby mode.
Standby is the most basic state of your Sprint PCS Phone. The
phone goes into standby mode soon after you turn it on or
whenever you press . When your phone is in standby mode,
you will typically see the banner (that’s the message displayed
when you turn on your phone). From standby mode, you can
press the key under [MENU] to open the menus or the
key under [BOOK] to view the internal phone book. If you
enter a phone number, you can press to dial it, follow the
instructions on the display to save it in the internal phone book
or find it in the internal phone book if it’s already there.
Press at any time to return to standby mode. Be careful; if
you’re on a call when you press , you’ll return to standby
mode because it also disconnects the call. Press several
times or hold it down to return to standby mode without ending
the call.
Power Save mode.
Your Sprint PCS Phone comes with a Power Save feature that will
automatically be activated if your phone is unable to find a signal
after 15 minutes of searching. While this feature is active, the
phone’s battery charge is conserved. The phone will automatically
recheck for a signal periodically. To manually force the phone to
recheck for a signal, press any key. A message on the display will
let you know when the phone is operating in Power Save mode.
C
END
END
TALK
END
QCP1960 6/3/99 10:23 AM Page 19