Installing the Well Water Filter
Electronic Head
This step will require the materials listed below
Questions? Call (800)-589-5592
4
Electronic
Head
Softener
Tank
1) Unscrew the cap on top of
the well water filter tank.
2) There is a blue cap inside that
also needs to be removed. Both
caps can be discarded.
3) Locate the opening at the
bottom of the well water filter
electronic head.
4) Align the opening on the
bottom of the tank head with
the pipe inside the tank.
5) Press the tank head down to
allow the threads to catch.
6) Turn the tank head clockwise
until it is fully tightened.
Tank
1
Note: If your tank was shipped
with a jacket, it can be zipped
around the tank prior to or after
the installation is completed.
Well Water Filter System
