Powering the Tank Head
This step will require the materials listed below
Questions? Call (800)-589-5592
9
Well Water Filter Tank
(Already Installed)
Power
Supply
9v Battery
33) The power cord will be
connected to the connection
on the far left beneath the
electronic tank head.
34) The power adapter will then
be plugged into a power supply
that isn’t controlled by a switch.
35) Lift off the cover on the
electronic head.
36) Locate the batter
connection beneath the
display. Connect a 9v battery
then store it in the tray.
37) Replace the tank head
cover.
You are ready to test the system
Well Water Filter System
