Spring Air Systems Dynaflow, Руководство по установке и обслуживанию

Страница: 12 / 28

10
Grease Filters for Dynaflow Hoods
VE- Stainless Steel Baffle Filters
The exhaust air accelerates through two 90
degree turns within the baffle filters. The
liquefied grease then drains down the vertical
length of the baffles to the grease trough and
into a grease cup.
Each grease baffle contains weeping holes to
allow the liquid grease to drain into the grease
trough.
Always ensure that the grease filters are
installed with the weeping holes down
toward the grease trough.
Put the Baffle Filter in a dishwasher or in a pot sink in a detergent and water mixture to soak or spray the inner surfaces
with hot water and detergent to clean.
CA- Stainless Steel Cartridge Filters
The Cartridge Filter provides high efficiency grease extraction at an
economical price. Unlike standard baffle filter grease extraction is carried out
inside the Cartridge Filter not on any visible surface. The Cartridge Filter is
always aesthetic pleasing because the smooth stainless steel surface does not
collect oil or grease. The Cartridge Filter can be removed for easy cleaning.
Each cartridge is also adjustable for various exhaust volume.
Easy Cleaning
Remove the Cartridge Filter Module from the hood rack and take note of the
location of each module if the settings vary across the hood. Remove the
Cartridge Filter Baffle from the Module by taking out two wing nuts; located
in module air inlet.
Put the Cartridge Baffle along with the Module up side down in a dishwasher
or just spray the inner surfaces with hot water and detergent.
Re-install the Cartridge Baffle in the Module with its proper initial air setting
number and tighten the two wing nuts from the air inlet of the Module.
EXHAUST AIR OUT OF BAFFLE FILTER
EXHAUST AIR INTO BAFFLE FILTER
FILTER BAFFLES
FILTER FRAME
Cross Section of Baffle Filter
Figure 15
CA Cartridge
Figure 16