7
TJM60AG
Tank Cleaner ǀ 08/07/2017
Next connect 3/8 NPT
male swivel end of hose
to round inlet body
First connect 3/8 NPT male end
of hose to coupling on handle
marked water
First connect 1/4 NPT male
end of hose to coupling on
handle marked air
Next connect 1/4 NPS
female swivel end of hose
to fitting on inlet side of
air motor
Install air
hose
Round
inlet
body
Install high
pressure water
hose
Step 7 .
Install the included 1/4 NPT (male) x 1/4 NPS (swivel female) air hose. First, using an adjustable crescent wrench,
connect the 1/4 NPT male end of hose to coupling marked air on handle assembly. Next, connect the 1/4 NPS (swivel
female) end of hose to fitting on in side of air motor.
Step 8 .
Install high pressure water hose 3/8 NPT (male) X 3/8 NPT (male swivel). First connect 3/8 NPT (male) end to coupling
marked water using an adjustable crescent wrench. Next connect 3/8 NPT (male swivel) end to round inlet body using
an adjustable crescent wrench. Note: it is suggested to wrap pipe thread sealant tape on pipe threads to provide good
sealed connections .
