11
TJM60AG
Tank Cleaner ǀ 08/07/2017
MAINTENANCE
The following are instructions for replacing seals located in the nozzle hub and the gear box for the TankJet
®
M60 . After
many hours of operation the seals will wear and should be replaced to prevent performance problems and wear problems
on other system components. It is suggested to change the seals after 300 hours of TankJet M60 operating time.
Replacing Nozzle Hub Seals
Replace worn seals in nozzle hub
1 . Adjustable Crescent Wrench
2 . Screw Driver
Step 1 .
To remove and replace worn seals from nozzle hub, first
remove cap from nozzle body by using an adjustable
crescent wrench
Step 2 .
To remove and replace worn seals from nozzle hub
first remove cap from nozzle body using an adjustable
crescent wrench
Ball Valve with
handle in OFF
position
Nozzle
Body
Cap
Cap
Nozzle
Body
Seal to
Replace
Seal to
Replace
Nozzle
Hub
Protective
Cover
