5
PRESSURIZED SYSTEMS
It is important to recognize proper safety precautions when using a pressurized spray system. When dealing with
pressure applications, the system pressure should never exceed the lowest rated component. Always know your sys-
tem and all component capabilities, maximum pressures, and flow rates.
WARNING: Fluids under pressure can penetrate skin and cause severe injury.
ATTENTION: Always remember to carefully read the chemical manufacturer's labels, follow SDS,
and all directions.
WARNING OF SHOCK HAZARD
To reduce the risk of electric shock, do not open the cover on electrical control panel. For service contact
Spraying Systems Co.
®
at 1
-
866
-
321
-
2250.
WARNING: Plug panels into A GFCI outlet.
WARNING: To prevent injury, avoid contact with potentially hot parts. Components can cause
severe burns. Do not aim the spray at any person or part of the body. Do not place any part of your
body in the spray pattern.
CHEMICAL COMPONENTS
The use of any chemicals requires careful control of all worker safety.
Spraying Systems Co.
®
does not manufacture or supply any of the chemical components used in this equipment and is
not responsible for their effects. Because of the large number of chemicals that could be used and their different
chemical reactions, the buyer and user of this equipment should determine compatibility of the materials used and
any of the potential hazards involved.
WATER AND MOISTURE
The control panels are rated NEMA 4, unless otherwise specified. The rating is only with the door closed and properly
locked. Being NEMA 4 rated, the control panels can withstand streams of water directed at them; however we sug-
gest avoiding spraying on the unit externally if possible.
2.2 UNPACKING THE SYSTEM
The system components come carefully packaged to protect them from damage. Use caution when opening the
crate. The crate will contain all parts needed to install the unit. Parts of the unit may be wrapped in bubble wrap. Re-
move all of the packaging material wrapping the system.
CAUTION: The packaging may contain exposed cables, hoses, or other components. Always exer-
cise caution when opening boxes to avoid accidental damage or slicing of various components.
Once unpacked and removed the from the crate, the system is ready for installation and connection.
