P/N 20126 Rev B
Page 22
Spot Licensing
In order to use the screening functionality of Spot, the device needs to be licensed. If your device
came new from the factory with this instruction document, your license is already installed and
active. If you have updated the software on your device, the licensing will need to be updated as
follows:
1.
Connect an empty USB device to the Spot USB port.
2.
Go to tools, then the Spot License button.
3.
After a moment, a dialog box will appear indicating that the registration file has been exported
to the USB drive.
4.
Send the file titled spot-[serial number].reg to PediaVision Support at
PediaVision Support will review your registration file and email you back a valid license key. Once
you receive the key, perform the following:
1.
Save the file to the top level (root directory) of a USB Drive.
2.
Insert the USB drive into the USB port on Spot.
3.
From the Tools menu, select Spot License.
4.
After a moment, a dialog box will appear indicating that the license file has been imported onto
the Spot device.
