sportworks TERRACE, Руководство по сборке

Страница: 10 / 16

10106 rev. A
sportworks.com 10
STEP 4:
Install cross tube using four (4) 3-3/4” long
3/8-16 hex bolts, washers, and nylock hex
nuts.
If assembling a single-sided module, install
the cross tube such that the Sportworks logo
is in the position shown. This ensures that
the tray mounting holes are oriented
correctly.
For double-sided modules, the cross tubes
are symmetrical.
The bolts should extend outward with the
nuts on the outside of the upright frames, to
facilitate later installation of extension units.
Tighten these bolts, then all other bolts that
were previously left loose.
STEP 5:
Move partially assembled frame into final
position.
For single-sided modules, ensure a
minimum of 4” spacing between the back of
the rack foot and the wall as shown.
Install extension module frames if applicable
– see Appendix A