sportworks TERRACE, Руководство по сборке

Страница: 9 / 16

10106 rev. A
sportworks.com 9
STEP 3:
I
nstall the outer connecting bar at the front
of the upright frame ensuring the hex nuts
are located on the bottom of the part.
NOTE: This part is not symmetrical,
therefore, ensure proper orientation of
holes as pictured when installing.
Thread two (2) 5/8” long 3/8-16 hex bolts
and washers. DO NOT fully tighten
fasteners.
If installing single-sided modules, continue
to STEP 4.
For double-sided modules, install the
outside connecting bar on the opposite
side.
Be careful to match the orientation of the
connecting bar to what is shown in the
image to the right.