902-289 6’ Spiral Slide
Page
11
Rev. 07/22/03
SportsPlay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO 63120 (314) 389-4140
902-282: SPIRAL SLIDE P-1
KKJJJ
SPECIFICATIONS
PARTS LIST
Event:
One-piece rotationally
molded slide with entry hood along
with separate deck, protective
sidewalls, kick plate, and attaching
clamps. Solid one-piece
construction eliminates possible bolt
together gaps and eases installation.
Paint:
shall be electrostatically
applied polyester dry powder coating
Hardware:
shall be a combination
of zinc-plated, stainless steel and
aluminum.
Ref Description QTY
A Slide
Body 1
B
Left and Rt Guard
Rails
2
C Slide
Platform 1
3.5” O.D. Center
Pole
1
Hardware
Deck
Clamps 2
Pipe
Clamps
4
MAINTENANCE:
1. Touch up any marred paint
surfaces.
2. Periodically check hardware for
integrity and tightness.
INSTRUCTIONS
:
The Spiral Slide can accommodate any size deck up to 6’.
If you are mounting to any ht deck below 6’, you will be supplied
with a kick plate to attach Slide deck (platform) to appropriate
deck and still achieve 6’ for overall Slide height.
•
STEP #1:
Using 2 deck clamps, attach spiral slide deck (platform) to main
structure deck. Use, 2’ x 4’ or ladder to prop up end of deck
until slide is ready to mount up to slide deck.
When applicable, attach kick plate to main structure
Attach right and left guardrails with 4 pipe clamps
See second page for remaining procedures
A
C
B
Drill through or mark holes to be
drilled when guardrails are in the
appropriate position
Use molly to secure guardrail to slide hood
