SportsArt Fitness T652M, Инструкция по эксплуатации

Страница: 47 / 56

USER PARAMETER SETTINGS
User parameters determine basic operating features, such as distance units, of the
treadmill. To change these parameters, at the banner display, hold the CHANGE
DISPLAY button for three seconds.
1. Set up MPH/KPH. The 14-segment display will show the current status as either
"UNIT -MPH" or "UNIT - KPH". Press INCLINE / to change the setting from
MPH or KPH. Press the ENTER key to confirm your choice.
2. The total accumulative distance appears as follows.
Press the ENTER key to display the total time.
3. The total accumulative time is shown as below.
Press the ENTER key to display the version of the software.
4. Display the software version:
A. The 14-segment display will show the control board version: "CTL XXXXX XX".
Press the ENTER key to continue.
B. The 14-segment display will show the drive board version: "DRV XXXXX XX".
Press the ENTER key to return to the banner display.
The USB port on this product provides 5V 500mA for the charge of electronic
accessories, like cameras, MP3 players, cell phones. At the present, the USB port
does not allow for the download or upload of programs. Note that iPod third generation
and newer products support USB power charging.
＜ ▲ ▼＞
–
–
USB PORT
D I S T - ? ? ? ? ? ? K M
T I M E - ? ? ? ? ? ? H O U R
45