6-2: Below is an example of the dox matrix window that shows the target heart
rate to be 124 beats:
USER AGE
WT
(a) 1. Heart: represents user's current heartbeat.
During your workout, the heart (green & red colors rotate) on the
display to indicate that your heart rate signal is clear. However, if
the display does not detect a heart rate signal, the heart color
remains green.
2. Suggested RPM (red flashing dot): represents user's suggested
Revolutions per minute.
3. Current RPM: represents user's current Revolutions per minute.
4. Target Heart Rate: represents user's target heart rate.
(b) If the MODIFY setting is "YES", the figure of the target heart rate will
become red and blink. Press
or
to adjust the target heart rate, then
press ENTER to begin your workout.
Note: The heart rate figure cannot be set lower than 84 or higher than the
maximum workout heart rate for your age.
(c) If the MODIFY settting is "NO", the target heart rarte cannot be changed.
(Please refer to Page 16 for System Default Setting.)
6-3: A Polar transmitter belt must be worn properly during workout to allow the
heart rate signal to be successfully transmitted to receiver located inside the
display console. A "NO HEART RATE READING" message will scroll across
the dot matrix window if the display does not detect a heart rate signal for
more than 3 seconds. Once the display can detect a heart rate signal again,
the scrolling message will be gone, then will continue the heart rate function
again.
▲
▼
Note:
▓
▓
▓
▓ ▓ ▓
▓
▓
▓ ▓ ▓ ▓ ▓
▓
▓
▓
▓
▓ ▓ ▓ ▓ ▓
▓
▓ ▓ ▓
▓ ▓ ▓
▓ ▓ ▓
▓
▓
▓
▓
▓
▓ ▓ ▓
▓
▓
▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓ ▓
Heart
Suggested
RPM
Target Heart
Rate
Current RPM
•
•
21
PDF created with pdfFactory trial version
www.pdffactory.com
