SportDOG Upland Hunter 1875, Руководство по эксплуатации

Страница: 20 / 32

20 1-800-732-0144
PROGRAM THE SYSTEM FOR TWO-DOG OPERATION
SportDOG
™
Collar Receivers/Remote Beepers can be set to respond to either the up or down toggle
switch position. A SportDOG Add-A-Dog ® Collar Receiver/Remote Beeper must be purchased to train/
locate a second dog in two-dog mode. Please refer to back cover for the compatible Add-A-Dog
Collar Receiver/Remote Beeper for this system.
1. Program the Remote Transmitter to modes 1 – 6 in either the Toggle
Switch
up or Toggle Switch down position (see pages 16-17).
2. Flip the toggle switch to the up position to program the fi rst Collar
Receiver/Remote Beeper.
A. Turn the Collar Receiver/Remote Beeper off.
B. Press and hold the On/Off Button for each. The Collar Receiver/
Remote Beeper Indicator Lights will come on, then turn off in 4-5
seconds. If the On/Off Button is released too early, the Collar
Receiver/Remote Beeper Indicator Lights will begin their normal
fl ashing. If this occurs, start over from
A .
C. After the Collar Receiver/Remote Beeper Indicator Lights have
turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter
until the Collar Receiver/Remote Beeper Indicator Lights fl ash 5
times. If the Collar Receiver/Remote Beeper Indicator Lights do not fl ash 5 times, start over
from
A .
3. Program the second Collar Receiver/Remote Beeper the same way using A through D above, but
with the toggle switch in the down position.
PROGRAM THE SYSTEM FOR THREE-DOG OPERATION
SportDOG ™ Add-A-Dog ® Collar Receivers/Remote Beepers must be purchased to train/locate
additional dogs. Please refer to back cover for the compatible Add-A-Dog Collar Receiver/Remote
Beeper for this system.
1. Program the Remote Transmitter to mode 5 in either the Toggle Switch up or the Toggle Switch down
position (see pages 16-17).
2. Flip the toggle switch to the
up position.
3. Program the fi rst Collar Receiver/Remote Beeper:
A. Turn the Collar Receiver/Remote Beeper off.
B. Press and hold the On/Off Button for each. The Collar Receiver/Remote Beeper Indicator
Lights will come on, then turn off in 4-5 seconds. If the On/Off Button is released too early, the
Collar Receiver/Remote Beeper Indicator Lights will begin their normal fl ashing. If this occurs,
start over from
A .
C. After the Collar Receiver/Remote Beeper Indicator Lights have turned off, release the On/Off
Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Collar Receiver/Remote
Beeper Indicator Lights fl ash 5 times. If the Collar Receiver/Remote Beeper Indicator Lights do
not
fl ash 5 times, start over from A .
4. Program the second Collar Receiver/Remote Beeper using A through D above, but using the Lower
Button in place of the Upper Button.
5. Program the third Collar Receiver/Remote Beeper using A through D above, but using the Left-Side
Button in place of the Upper Button.
TOGGLE SET TO UP FOR DOG
1 OR TOGGLE SET TO DOWN
FOR DOG 2
ST
E
P
::
09
ST
E
P
::
10