12
d) Assembly of net hoop braces
:
Fix braces (see 1
st
picture bottom left) at crossbar and
net hoops. At first place flat plates on the crossbar’s groove (see 2
nd
picture bottom
right). Push nuts already mounted in point a) below the holes of the flat brace plates
and fix each brace with 1 hexagon socket cylinder screw DIN 912, M6 x 20mm and 1
washer DIN 9021, Ø 7.4 x 22mm (see 3
rd
picture bottom left). Now adjust round
shaped plate of brace and hole of net hoop and stick from the goal’s inside 1 hexagon
socket cylinder screw DIN 912, M6 x 40mm with 1 washer DIN 9021, Ø 7.4 x 22mm.
Screw from the outside 1 cap nut DIN 986, M6 (see 4
th
picture bottom right). Finally
tighten all screwed fastenings of points c) and d).
crossbar
