Copyright © Lojer Oy, 2021 | 05/2021
16
Ensure that there are no obstacles in the foot control range of movement.
Squeezing hazard
caused by accidental movement of the device!
3.5 Paper roll holder
The paper roll stand (80cm) is located on the top of the table (Figure 7). The shaft is locked in position on the
frame. Raise the shaft holding levers and release the shaft. Insert the shaft and paper roll by inserting the shaft
into its slot
3.6 Trendelenburg (option)
Adjust the Trendelenburg angle by lifting the handle at the foot end of the table (Figure 8). Hold on from the
upholstery and set the table to desired angle. Table locks in place when the handle is released.
Act with caution when using Trendelenburg function.
Figure 7: Paper roll holder
Figure 8: Trendelenburg
