Spokey CD10A, Руководство пользователя

Страница: 13 / 24

www.spokey.eu 13
1. Use a 4 mm hex key to remove the real wheel covers on both sides.
2. Remove the screw with a screwdriver. Then loosen the rear wheel axle nuts and remove the rear wheel roller. Move the wheel forward.
3. Rotate the shim in order to adjust the tension of the belt.
4. Adjust the wheel with 13 mm socket wrenches, then tighten the brake clamp with a screwdriver and a 8 mm socket wrench.
5. Install the covers with a 4 mm hex key. Be careful not to tighten the nuts too much.
1. Use 5 mm hex keys to remove the screw as shown above.
2. Install the new wheel set as shown above.
3. Install the wheel on the fork.
1
1
4 5
2
2
3
3
BELT ADJUSTMENT
FRONT WHEEL REPLACEMENT