Spokey CD10A, Руководство пользователя

Страница: 11 / 24

www.spokey.eu 11
Required keys and wrenches: socket wrench 5 mm, 10 mm, hex key
1. Put the steering column on its base (the locking mechanism should be inserted into a hole in the column frame).
2. Rotate the clamping ring as shown above.
3. Secure the handlebars on the support as shown above.
BRAKES
Check if the brakes operate properly before every scooter use.
FRAME, FORKS, AND HANDLEBARS
Before every use check if the frame, forks, and handlebars are not
damaged, i.e. there are no cracks or paint damage.
TYRES
Check the tread of the tyres periodically.
BATTERIES
Always turn the power off when the scooter is not used.
Ride the scooter wearing a helmet and (ankle and knee) patches. You
should also wear reflective elements. Never use the scooter at night, in fog,
and when there is reduced visibility.
Brake adjustment: a 10 mm socket wrench is required.
1. To tighten the line, screw in the adjustment screw clockwise, and to loosen it, screw the adjustment screw anticlockwise.
2. If it is impossible to tighten the line using the screw on the brake holder, loosen the screw and tighten the line as shown above.
Warning! Ride at a speed at which you can always stop safely.
INSTALLATION
MAINTENANCE
BRAKE LINE ADJUSTMENT:
HELMET, PATCHES,
REFLECTIVE ELEMENTS
1
1 2 3
2