Spohn & Burkhardt SV1C Series, Руководство по эксплуатации

Страница: 80 / 98

80
Spohn & Burkhardt
Figure 29.
19
16
16
Schema
Scheme
4
14
4
15
19
15
20
20
14
Cable entry
4. Route the cables from below into the spacer (
4
) and via the clamp rail (
16
) (see Figure 29 “Cable en-
try”, page 80) .
Caution!
Make sure the cables do not impede the function of the slewing ring or the brake system.
Attention!
Make sure all cables are laid correctly without kinks or points where they can chafe.
5. Connect the corresponding cables to the terminal block (
20
) (see Figure 29 “Cable entry”, page 80)
as per the related circuit diagrams (see chapter 11. “Reference documents”, page 95).
6. Tip the seat back and fasten the spacer ( 4 ) using the two locking screws ( 18 ).
7. Open the consoles as follows:
Consoles A; AS and AJ