SPM GT Push 1, Руководство оператора

Страница: 34 / 68

Data di emissione: Dicembre, 2018 Revisione: 2 Pag. : 34/68
- Unscrew the security knob in the direction of
the arrow (threading on left), then pull out the
mixing unit, the bell shaped seal and the bowl
gasket on the back (fig.18).
- Remove the drip tray by rotating it upward
and pulling it outward (fig.19).
- Thoroughly wash all the removed components
with hot water and dish washing, but do not use
abrasive detergents or powders that can
damage the bowl.
IMPORTANT
Do not use too aggressive sanitizers or
detergents, these kind of products could
damage the bowl and the other
components.
CAUTION
Never perform these washing operation
with a dish washing machine; failure to do
so could seriously damage the unit’s parts.
- Rinse well and then place all the components
in the sanitizer solution; for proper sanitizing
the parts must remain fully plunged (KAY-5
sanitizer suggest at least 1-2 minutes).
- Once the correct times for sanitising have
been followed, remove and dry all components
on a clean surface. DO NOT RINSE.
- Thoroughly wash the evaporator and the drip
tray surfaces with a sponge soaked with the
sanitizer (see fig.20), leave at least 1-2 minutes
and let it dry, do not rinse.
Fig. 18
Fig. 19
Fig. 20