6 TSL.R.030 RIBBON HAND DRYER MANUAL
Location
Ribbon hand dryers are supplied with 18”
of flexible hose, so the dryer motor unit
must be fitted within 18” of the head unit,
to ensure that the motor air-outlet head
can be connected
Basins
Use of a The Splash Lab Monolith basin
is recommended for use with the Ribbon
range of products.
If an alternative basin is used, then
appropriate mounting points must
be created in basin or countertop to
accommodate the Ribbon products.
Power supply
A 15A fused supply must be provided for
connection to the mains power supply.
Disclaimer: Circuits should only use
80% of their given amperage to prevent
overloads. The standard US 120V 15 Amp
circuit should only use up to 12 of its 15
amps.
Spacing
If the Ribbon hand dryer is installed with
other units from the Ribbon range, these
should be fitted at 5 1/2” centres.
before you install
5 1/2"
5 1/2"
Ø
1 3/8"
3"
