14 TSL.R.030 RIBBON HAND DRYER MANUAL
commissioning
Turn on the power supply to the dryer, and then test that the dryer will operate when
the user’s hands are placed within the detection range.
The motor speed and sensor range can be adjusted to suit user preference and the
environment, if required. The heater element can also be switched off if desired.
Warm air speed adjustment
1. Switch off the power, loosen the cover
screws and remove the cover.
2. Use small Phillips head screwdriver
to turn variable resistor shaft. Turn
clockwise to increase the motor
speed; turn anticlockwise to reduce
the motor speed
Sensor range adjustment
1. Switch off the power, loosen the cover
screws and remove the cover.
2. Use small Phillips head screwdriver
to adjust the variable resistor. Turn
clockwise to increase the sensitivity;
turn anti-clockwise to reduce the
range.
