P n e u m a t i c
R o t a r y H a m m e r D r i l l
2 2 4 0 4 0 0 1 0 , 0 0 3 0 , 0 0 4 0
M a s c h i n e n f a b r i k G m b H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29
, www.spitznas.de
Translation of the original manual,
compiled: 25.05.12
224040010_30_40_BA_en_Version_01
Page 7 of 13
Rotary hammer drilling
Fig.2: Pull back the adjusting sleeve and turn it clockwise to lock. Do not use the quick-release
chuck at this setting because drills and tools will be damaged.
Fig.3: Pull back the locking sleeve and insert the drill. Turn the locking sleeve until it snaps back
into the outset position. Press the machine against the work surface before switching on otherwise
the tool will not hammer. If the drill sticks in the hole, withdraw and reinsert it several times when
drilling.
Fig.4: When starting to drill into brittle materials (tiles etc), unlock the adjusting sleeve to "rotary
drilling only", hold the machine by the adjusting sleeve and press it slowly against the work surface
until it hammers weakly. Hold and continue to drill the hole. Switch off the machine briefly and
relock the adjusting sleeve.
Rotary drilling only
Fig. 5: Unlock the adjusting sleeve. The quick-release chuck is used at this setting. Commercially
available twist drills can be used in the quick-release chuck.
OPERATING INSTRUCTION FOR UNDERWATER TOOLS
Before working under water
•
Check the machine with regard to leakages
•
Check the machine regarding functioning of all parts (drilling, striking, actuating valves, etc.)
•
Spraying of all moving parts with spray OKS 8604 (or similar).
•
Fitting the tools with grease.
After having worked under water
•
Clean the machine
•
Dry the machine by blowing out with compressed air
•
Spraying of all moving parts with spray OKS 8604 (or similar).
For additional information refer to the machine specific operation and maintenance manual as
well.
For a long lasting operation of the machine we recommend a regular (every 3 months) general
overhaul by the company SPITZNAS.
Spray OKS 8601: Spitznas-part no. 9 9902 0120
