P n e u m a t i c
R o t a r y H a m m e r D r i l l
2 2 4 0 4 0 0 1 0 , 0 0 3 0 , 0 0 4 0
M a s c h i n e n f a b r i k G m b H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29
, www.spitznas.de
Translation of the original manual,
compiled: 25.05.12
224040010_30_40_BA_en_Version_01
Page 6 of 13
Í
OPERATION INSTRUCTIONS
Before using the machine:
Open oil plug item 4 and pour in oil from oil ampul in the machine box.
Do not exert undue pressure on the machine. This will not increase its performance. Just position
the bit and guide it into the hole.
Placing the machine into the box
Make sure the adjusting sleeve is locked at the setting "rotary hammer drilling".
Side handle
This can be turned through 360° and clamped in any desired position.
Depth gauge
Press unlock button, adjust the depth gauge and release button.
Lubrication of shank end
Occasionally clean shank ends and spray sparingly with lubricant sprayer. Do not spray into the
chuck.
Bild 1
Bild 2
Bild 3
Bild 4
Bild 5
Drilling in explosive surroundings
Fig.1: The drill must be water cooled to avoid sparks. Water connection on ball cock.
