Customer Service 1-888-707-1880
Dyaco Canada Inc. 2017
Email: [email protected]
14
Quick Start
•
Press “START” button and the console start performing the program. Press “LEVEL” up/down
buttons further to change the resistance level you desire.
• Press “HOME” button on the top left corner or “STOP” to pause your workout.
Featuring Functions of this Elliptical:
Touch-control screen is installed for operating the elliptical. You can directly touch any functional
button on the screen or through buttons on the bottom to control. On the bottom, there are the
“START” button to begin the workout, “STOP” button to pause/stop exercise and “FAN” button to
turn the fan on or off.
Pause / Stop
• Press “STOP” button once or “HOME” button on the screen, the unit will stop and keep values of
time, distance and calorie on the screen. The screen will count down for 5 minutes then reset.
• Press “START” button to continue the workout during pause.
•
Press “STOP” button twice, the console will ask you if you want to end the workout. If “STOP”
button is pressed the third time, the console will display your workout summary.
Heart Rate Feature
The Pulse (Heart Rate) on the screen shows the current value of the heart beats per minute. You
must use both left and right stainless steel sensors to pick up your pulse. Pulse values are
displayed anytime the computer is receiving a Grip Pulse signal. You may use the Grip Pulse
feature while in Heart Rate Control. The console can also detect the pulse from a wireless chest
strap.
To Turn Off the Unit
The screen will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is
called sleep mode. In sleep mode, the elliptical will power down everything except for a minimum of
circuitry for detecting key presses, so it will start up again if this is activated. There is only a tiny
amount of current used in sleep mode (about the same as your TV when it is turned off) and it is
perfectly fine to leave the main power switch on in sleep mode.
Audio:
To listen to any audio source with this unit, you must plug a headset into the port on the console.
