CUSTOMER SERVICE 1-888-707-1180
6 MAURICE PINCOFFS CANADA©2009
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please read this manual
carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first study the
overview drawing.
It will take two people to assemble your unit.
Ensure all bolts are firmly tightened after each step.
■
UNPACKING THE UNIT
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift Box
over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts
are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that
are in parenthesis (#) are the item number from the assembly drawing, for reference.
STEP 1: REAR RAIL ASSEMBLY
1.
Put the 2pcs of 3/8"
×
19
×
1.5T Flat Washers (96) on the 2pcs of 3/8"
×
2-1/4" Hex Head Bolts (75) and
tighten them, through the Top of the Rear Stabilizer Tube (Marin Frame), into the Rear Rail Assembly (2)
by using the 13/14 m/m Wrench (124).
2.
Put the 4pcs of 3/8"
×
23
×
2T Curved Washer (104) on the 4pcs of 3/8"
×
3-3/4" Hex Head Bolts (77) and
tighten them through the Front of the Rear Stabilizer Tube (Main Frame), into the Rear Rail Assembly (2)
by using 13/14 m/m Wrench (124).
3.
Install Front Stabilizer Cover (59) with 2pcs of M5
×
12 m/m Button Head Socket Screws (84) by using the
Phillips head Screwdriver (126).
