6
STEP 1:
Rear Stabilizer & Seat Back
1. Attach the Rear Stabilizer (
7
) to the Main Frame (
1
) with the two Carriage Bolts (
65
), two Flat
Washers (
84
) and two Cap Nuts (
191
).Tighten completely with the Wrench (
112
).
2. Attach the Seat Back (
5
) to the Seat Carriage (
4
) of the main frame. Slide a Hex Head Bolt (
67
) and a
Hex Head Bolt (
142
) through each side, then attach a Flat Washer (
77
) and a Nyloc Nut (
89
) to each
bolt. Tighten the bolts just enough so there is no side to side play, but freedom of movement front to
back. Use the Wrenches provided (
112
&
132
).
3. Insert an end cap (
32
) into each opening of the Front Stabilizer Tube. You may need to tap them in
with a rubber mallet if they are tight.
HARDWARE
#77.
3/8” x 19 x 1.5T
Flat Washer
(4 pcs)
#84.
3/8” x 25 x 2T
Flat Washer
(2 pcs)
#89.
3/8” x 7T
Nyloc Nut
(4 pcs)
#65.
3/8” x 53mm
Carriage Bolt
(2 pcs)
#67.
3/8” x 4”
Hex Head Bolt
(2 pcs)
#142.
3/8” x 4-1/4”
Hex Head Bolt
(2 pcs)
#191.
3/8”
Cap Nut
(2 pcs)
Содержание 161168325
Страница 22: ...22 Exploded View Diagram ...
