Customer service 1-888-707-1880
Dyaco Canada Inc 2013.
Email: [email protected]
8
STEP 1: REAR STABILIZER & SEAT HANDLEBAR ASSEMBLY
1. Install the Rear Stabilizer (7) onto the Main Frame with four 3/8” x 2-1/4” Hex Head bolts (65)
and four 3/8” x 1” Flat Washers (84).
2. Install the handlebar assembly (6) onto the seat carriage (4) with four 3/8” X
2”
bolts (71)
installed through the top holes and secured with four 3/8” flat washers (77) and 3/8” nylon nuts
(89). Install two 3/8” X 2-3/4” bolts (175) through the side holes and secure with two 3/8” flat
washers (77) and 3/8” nylon nuts (89).
3. Plug the Left hand pulse wire
(27)
into the corresponding left socket
(42)
located in the left
plastic side case under the seat carriage, and the Right hand pulse wire
(21)
into the right
socket
(26)
.
Assembly Instructions For 161168800 CR800
