Spirent B2-800-QD-4-T1S Installation Instructions
Connecting to the Appliance
Spirent B2-800-QD-4-T1S Installation Instructions
|
19
PN 71-009377 Rev A May 2022
ping6 <ipv6address>
Ping an IPv6 address
ptp
Display or change the ptp settings
reboot
Reboot the system
recovery <chassis|tm> <enable|disable>
Enable or disable appliance or test module recovery (Test
Module Recovery is not supported on all test modules)
resetnetwork
Reset all network settings to the factory defaults
restartsysmgr
Restart system manager
securemode [on|off]
Enable or disable secure mode
serialno
Show the appliance serial number
shutdown
Shut down the system
status
Show the status summary
switch_version
Switches to the standby partition and reboots the system
standby_version
Displays the version of the standby partition (non-active)
version
Display the current version
Table 6.
Spirent Admin Commands (continued)
Command
Description
