Spirax Sarco SP7-20, Инструкция по установке и обслуживанию

Страница: 51 / 56

IM-P706-03 CTLS Issue 1
51
SP7-20 Smart Positioner
6.4 Message codes
Message codes Message description
BREAK Action stopped by operator.
CALC_ERR Error during plausibility check.
COMPLETE Action completed, acknowledgment required.
EEPR_ERR Memory error, data could not be saved.
FAIL_POS Safe position is active, action cannot be executed.
NO_F_POS Safe position required, but not active.
NO_SCALE
Valve range limits have not yet been determined; therefore, partial
Auto Adjust cannot be run.
NV_SAVE Data is saved in the non-volatile memory.
OUTOFRNG
Measuring range is exceeded, Auto Adjust was automatically
stopped.
LOAD Data (factory settings) are being loaded.
RNG_ERR Less than 10 % of the measuring range is used.
RUN Action running.
SIMUL
Simulation has been started externally from a PC via HART
protocol; switch outputs, alarm output and analog position
feedback are no longer influenced by the process.
SPR_ERR Actual spring action is different from the adjusted one.
TIMEOUT
Time-out; parameter could not be determined within two minutes;
Auto-adjust was automatically stopped.