Spinning Studio Console, Руководство пользователя

Страница: 5 / 28

•
Consider carefully the requirements of the Americans with Disabilities
Act (ADA), US Code 28 CFR (see Section 305). ASTM standards
are voluntary and may not reflect current industry standards. The
actual area for access, passage around, and emergency dismount is
the responsibility of the facility. The facility should consider the total
space requirements for training on each unit, voluntary and industry
standards, and any local, state, and federal regulations. Standards and
regulations are subject to change at any time.
Important These spacing recommendations should be used when
positioning bike away from sources of heat, such as radiators, heat registers,
and stoves. Avoid temperature extremes.
•
Do not operate the bike where aerosol (spray) products are being used
or where oxygen is being administered.
•
Maintain the bike to keep it in good working condition, as described
in the this manual. Inspect the bike for incorrect, worn, or loose
components, and then correct, replace, or tighten prior to use.
•
If you plan to move the bike, obtain help and use proper lifting
techniques.
•
Do not attempt to service the bike yourself, except to follow the
maintenance instructions in this manual.