Spinning Studio Console, Руководство пользователя

Страница: 18 / 28

18
Customize Console Settings
1. As you install the third battery into
the console, press and hold Mode
until the screen displays all 8s.
2. Press Mode again to display the
cadence information screen.
If you need to re-pair the cadence sensor,
continue with Step 3. If your cadence sensor
is paired properly, press Mode to continue
setup and move to next section.
Use these settings to customize the console display or, if necessary, to re-pair
the cadence sensor with the console.
Important To enter the settings mode, you must press and hold Mode as you
install the third battery into the console.
The keys on the console are used as labeled by users, but function differently
when setting up the console.
Key Function during setup
S Start/Pause/Resume button
LS Long press Start/Pause/Resume button
M Mode Button
LM Long press Mode Button
B Backlight Button (increase number in code setting)
P Heart Rate Pairing (decrease number in code setting)
M M
LS M
To customize the console settings or re-pair the cadence sensor
with the console:
Figure 7