31
2.3.2 - COOLING MODE
After selecting the “AUTO mode” according to item 2.4.1 and if the internal
temperature of the vehicle is above the set-point, the equipment will initiate
operating in the “Cooling Mode” automatically.
Whenever the systems initiates on “cooling mode” the evaporator’s blowers will
start on “automatic mode”. However, the ventilation velocities may be changed
manually (see item 2.4.3).
Note: The evaporator’s blowers are activated, in the automatic mode, according
to the set-point programming.
2.3.3 - VENTILATION MODE
The “ventilation mode” provides two operation velocities:
1 – with the “AUTO mode” shut, press the key (VENT) and the “Ventilation
Mode” will start to operate at low velocity.
The indicator (10) will be on to inform this mode.
4 – To return to the automatic control, press key (VENT) until the indicator
(9) turns on, which informs that the ventilation is on automatic mode.
2.3.4 - ROOF HEATING (CALEFACTION)
1 – After selecting the “Auto mode”, according to item 2.4.1, and if the internal
temperature of the vehicle is below the set-point, the equipment will initiate
operating in the “Roof heating mode”.
Note: in this mode, the ventilation will operate only at low velocity.
2.3.1 -
AUTO MODE
1- To select the “AUTO mode” press the key (AUTO). On this mode the
system will control the functions available (cooling and heating) automatically,
searching for a better climate condition according to the set-point
temperature.
2 – To disable the “AUTO mode”, press once again the key (AUTO).
2 – To select high velocity, press once again the key (VENT). The indicator
(11) will be turned on to inform this function.
3 – To turn the “Ventilation Mode” off, press the key (VENT) one more time.
When the “AUTO mode” is on, the ventilation velocity is usually automatic, and
will be informed by the indicator (9) turned on. However, the ventilation velocities
can be altered manually, following the steps formerly described.
Operation
