Specifications
Product overview
Wireless Frequency:
2.4GHz, 802.11b/g
Input:
120VAC, 60Hz
Output Current:
Incandescent Load: 10A (1200W)
LED/CFL Load: 5A (600W)
Standby Power:
0.4W
Enclosure Type:
Type 1 Enclosure (after installation)
Action Type:
Type 1.Y action
IMPORTANT:
Review this installation guide in its entirety before starting installation
of your Smart Switch or removal of your old switches. Installation and maintenance
involving electrical wiring must be done by qualified person(s). Risk of Electric Shock:
Electricity can cause personal injury and property damage if handled improperly. An
external air gap switch shall be installed before circuit connection to this device. The
metal heatsink plate is not grounding, which might become live. Install with plastic Cover
Plate only.
Caution:
To reduce the risk of injury and/or overheating and damage to other equipment:
• Make sure that the power at the circuit breaker is turned OFF before starting.
• A neutral (typically white) wire is required.
• The wire colors indicated in this manual are typically found and may differ in some
constructions / regions.
• Ensure the wire conductors are securely fastened to each wire.
• It is recommended that a certified electrician completes all high voltage electrical
installations.
• Must follow all building and electrical codes in the region when installing.
• Ensure the Wi-Fi router’s signal is strong at the switch location.
• Do not install to control an appliance, motor or receptacle.
• Recommended to be installed in a minimum 2.5" depth device box.
• Switch does not work with smart bulbs or fixtures.
• Intended for installation in an in-wall electrical box.
NOTE: INSTALLATION OF THIS SMART SWITCH REQUIRES A
NEUTRAL WIRE. IF NEUTRAL WIRE IS NOT CONNECTED, THIS
SWITCH WILL NOT WORK. CONSULT A QUALIFIED ELECTRICIAN.
Before you start
